این پرونده از ویکیانبار است و ممکن است توسط پروژههای دیگر هم استفاده شده باشد.
توضیحات موجود در صفحهٔ توضیحات پرونده در آنجا، در زیر نشان داده شده است.
خلاصه
توضیحIron carbon phase diagram.svg
English: Iron–carbon phase diagram, at atmospheric pressure
This diagram is limited by pure iron on the left and by iron carbide on the right. The mains phases are:
iron: ferrite, ferritic steel
iron: austenite, austenitic steel
iron carbide: cementite, Fe3C.
It shows a eutectic and a eutectoid; these phases crystallise as a stacking of fine strips of pure phases (iron and cementite) in case of the eutectoid, or a pure iron containing small balls of cementite for the eutectic. Although it is heterogeneous, these phases behave like homogeneous pure bodies.
Steel is between 0 and 2.06 mass percent of carbon. Cast iron is between 2.06 and 6.67%.
Black lines indicate the metastable Fe/Fe3Cphase, red is the stable Fe/Carbon phase
This diagram is for illustrative purposes only, and is not thermodynamically accurate.
Español: Diagrama de fases hierro-carbono a presión atmosférica
Este diagrama está delimitado por hierro puro a la izquierda y carburo de hierro a la derecha. Las fases principales son:
Hierro: ferrita, acero ferrítico
Hierro: austenita, acero austenítico
Carburo de hierro: cementita, Fe₃C.
Se muestran un eutéctico y un eutectoide; estas fases cristalizan como un apilamiento de finas tiras de fases puras (hierro y cementita) en el caso del eutectoide, o un hierro puro con pequeñas esferas de cementita en el caso del eutéctico. Aunque heterogéneo, estas fases se comportan como cuerpos puros homogéneos.
El acero contiene entre 0 y 2,06 % en masa de carbono. El hierro fundido contiene entre 2,06 y 6,67 %.
Las líneas negras indican la fase metaestable Fe/Fe₃C; las rojas, la fase estable Fe/Carbono.
Este diagrama es solo para fines ilustrativos y no es termodinámicamente preciso.
تاریخ
منبع
اثر شخصی
Läpple, Volker - Wärmebehandlung des Stahls Grundlagen, Verfahren und Werkstoffe 8. Auflage, Seite 55ff.
Weißbach, Wolfgang - Werkstofkunde Strukturen, Eigenschaften, Prüfung 17. Auflage, Seite 76ff.
برای به اشتراک گذاشتن – برای کپی، توزیع و انتقال اثر
تلفیق کردن – برای انطباق اثر
تحت شرایط زیر:
انتساب – شما باید اعتبار مربوطه را به دست آورید، پیوندی به مجوز ارائه دهید و نشان دهید که آیا تغییرات ایجاد شدهاند یا خیر. شما ممکن است این کار را به هر روش منطقی انجام دهید، اما نه به هر شیوهای که پیشنهاد میکند که مجوزدهنده از شما یا استفادهتان حمایت کند.
انتشار مشابه – اگر این اثر را تلفیق یا تبدیل میکنید، یا بر پایه آن اثری دیگر خلق میکنید، میبایست مشارکتهای خود را تحت مجوز same or compatible license|یکسان یا مشابه با اصل آن توزیع کنید.